Motorola HDT100 manual Connecting your A/V Receiver, VCR and High Definition TV

INPUT AUDIO R

Connecting your A/V Receiver, VCR and High Definition TV

1Connect the component video cable supplied with the HDT100 to the Y, Pb, and Pr connectors on your TV and HDT100.

2Connect an optical digital audio cable to the OPTICAL connector on the HDT100 and the OPTICAL input connector on the A/V receiver.

3Connect a video cable to the VIDEO connector on the HDT100 and the CABLE/TV VIDEO connector on the A/V receiver.

4

5

6

7

8

If your equipment supports it, S-Video connections may be used in place of the standard composite video connections. In most cases, S-Video offers a higher level of standard definition video quality than composite video.

Connect a stereo audio cable to the VCR AUDIO OUT R and L

connectors on the A/V receiver and theand L connectors on the stereo VCR.

When using the Digital Audio output (OPTICAL or SPDIF), the left / right baseband audio connections to the A/V receiver are not needed.

Connect a stereo audio cable to the OUTPUT AUDIO OUT R and L connectors on the stereo VCR and the VCR AUDIO IN R and L connectors on the A/V receiver.

Connect a video cable to the INPUT VIDEO connector on the stereo VCR and the VIDEO VCR OUT connector on the A/V receiver.

Connect a video cable to the OUTPUT VIDEO connector on the stereo VCR and the VIDEO VCR IN connector on the A/V receiver.

Connect a video cable to the INPUT VIDEO connector on the stereo TV and the TV/MONITOR OUTPUT VIDEO connector on the A/V receiver.

To switch between viewing input from your VCR and input from your HDT100, change your TV’s video inputs.

35