Motorola HDT100 manual On-Screen Error Messages, Problem, Possible Solution, Cannot lock on a

Problem Possible Solution

After installing the HDT100 and running Auto Scan, not all the available channels have been added

Add the missing channels manually. See “Adding a Channel” in the On-Screen Menu section.

You may have to reposition your antenna to receive all the local channels, especially if different transmit towers are being used by the networks. For more information, log on to the following web site: http://www.antennaweb.org/

Cannot lock on a	Verify the channel number is correct.
signal when manually	Check the antenna and make sure it is aligned to the
adding a channel
	correct direction.
	Check the signal’s strength and quality. Press INFO to
	display the i-Banner and review the color bars at the
	bottom of the window. If any of the bars are red, adjust
	your antenna and try again.
No Closed Captions	Verify that the channel you are watching carries closed
	captioning.
Cannot receive	You may have to reposition your antenna. Consult the
channels after	following web site:
changing the	http://www.antennaweb.org/
HDT100’s location
On-Screen Error Messages
Bad Signal	Check to be sure that the antenna cable is connected
	properly (hand-tighten if necessary).
	Check the antenna and make sure it is aligned to the
	correct direction.
Scrambled Channel	The program you are watching is scrambled by the TV
	station. The program cannot be decoded by the
	HDT100.

42