Connecting your A/V Receiver, VCR and Standard TV

1Connect an optical digital audio cable to the OPTICAL connector on the HDT100 and the OPTICAL input connector on the A/V receiver.

2Connect a video cable to the VIDEO connector on the HDT100 and the CABLE/TV VIDEO connector on the A/V receiver.

If your equipment supports it, S-Video connections may be used in place of the standard composite video connections. In most cases, S-Video offers a higher level of standard definition video quality than composite video.

3Connect a stereo audio cable to the VCR AUDIO OUT R and L connectors on the A/V receiver and the INPUT AUDIO R and L connectors on the stereo VCR.

4Connect a stereo audio cable to the OUTPUT AUDIO OUT R and L connectors on the stereo VCR and the VCR AUDIO IN R and L connectors on the A/V receiver.

5

6

7

Connect a video cable to the INPUT VIDEO connector on the stereo VCR and the VIDEO VCR OUT connector on the A/V receiver.

Connect a video cable to the OUTPUT VIDEO connector on the stereo VCR and the VIDEO VCR IN connector on the A/V receiver.

Connect a video cable to the INPUT VIDEO connector on the stereo TV and the TV/MONITOR OUTPUT VIDEO connector on the A/V receiver.

When using the Digital Audio output (OPTICAL or SPDIF), the left / right baseband audio connections to the A/V receiver are not needed.

37

Page 42
Image 42
Motorola HDT100 manual Connecting your A/V Receiver, VCR and Standard TV