Motorola HDT100 Troubleshooting, Problem, Possible Solution, Poor picture, quality, No sound

TROUBLESHOOTING

Before calling your service provider, review this troubleshooting guide. This information is to help you quickly solve a problem. If your problem still exists, contact your service provider.

Problem	Possible Solution
The POWER LED on	Confirm the power cord is plugged into a functioning
the front panel does	power outlet.
not light up	Press POWER on the front panel to see if the LED lights
	up.
	Determine if the HDT100 is in “standby” mode by
	pressing STANDBY on the remote control.
No picture	Check to be sure that all cables are connected
	properly (hand-tighten if necessary).
	If you are watching TV using your VCR, be sure
	your VCR is on.
	Check that the TV is directed to the proper input
	source.
Poor picture	Check to be sure that all cables are connected
quality	properly (hand-tighten if necessary).
	Check the antenna and make sure it is aligned to the
	correct direction.
	Check the signal’s strength and quality. Press INFO to
	display the i-Banner and review the color bars at the
	bottom of the window. If any of the bars are red, adjust
	your antenna and try again.
No sound	Confirm that your HDT100’s and TV’s volume settings
	are properly set and not in "mute" mode.
	Check to be sure that all cables are connected
	properly (hand-tighten if necessary).
	Scan the channel again. Press MENU to display the
	on-screen menu and select Installation > Manual
	Scan.

41