Do not pinch, Harnesses, During this, Step

2.Identify the Pivot Axle (14), which is the longer of the two axles. Slide a Ramp Cover (48) onto an M6 x 16mm Patch Screw (76) as shown. Tighten the Patch Screw into one end of the Pivot Axle. Apply a small amount of the included grease to the Pivot Axle.

Have a second person hold the two Ramp Spacers (99) against the sides of the Frame (1) so they cover the indicated tubes on the Frame. Align the round tubes on the Ramp (3) with the Ramp Spacers. Make sure that the Ramp is turned as shown in drawing 3 below. Insert the Pivot Axle (14) into the Ramp, the Ramp Spacers, and the Frame. If necessary, use a rubber mallet to fully insert the Pivot Axle.

Slide the other Ramp Cover (48) onto an M6 x 16mm Patch Screw (76) as shown. Tighten the Patch Screw into the open end of the Pivot Axle (14).

3.Slide an M6 Washer (64) onto an M6 x 16mm Patch Screw (76). Tighten the Patch Screw into one end of the Incline Axle (13). Apply a small amount of grease to the Incline Axle.

Raise the Ramp (3). Insert the Incline Axle (13) into the welded tube under one side of the Ramp, through the motor screw, and then into the welded tube under the other side of the Ramp. As you insert the Incline

Axle through the motor screw, make sure that the motor screw does not turn.

Slide an M6 Washer (64) onto an M6 x 16mm Patch Screw (76). Tighten the Patch Screw into the open end of the Incline Axle (13).

4.Have another person hold the Upright (2) in the posi- tion shown.

Connect the Upper Wire Harness (115) to the Lower Wire Harness (42). Insert the connectors on the Wire Harnesses up into the Upright (2). Carefully pull the upper end of the Upper Wire Harness to remove the slack from the Wire Harnesses. See the inset drawing. Attach the Lower Wire Harness to the Upright with the Nylon Zip Tie (125). Pull the Nylon Zip Tie tight and cut off the excess.

Insert the Upright (2) into the Frame (1). Be careful to avoid pinching the Wire Harnesses (115, 42). Attach the Upright with two M10 x 108mm Button Screws (70), two M10 Split Washers (73), and two 7.6mm Spacers (109). Make sure that the curved sides of the Spacers are facing the Upright. Be careful to avoid damaging the Wire Harnesses with the Button Screws. Do not tighten the the Button Screws yet.

2
				Tubes	48	76
	3
Grease
48					99
48
76	14		99	Tubes	1
76				Tubes	1
3
					Motor
					Screw
						76
	3				64
	3
	Grease
76	64
76
	13
4			Pull	Do not pinch
			Pull	Do not pinch
				the wire
				harnesses
				during this
					step.
		2
				2
70	73	109	115
		109	42
			42	125
			1	125
			1
	73
	109			42
				1

NEL70950 specifications

The NordicTrack NEL70950 is an advanced treadmill designed to elevate your home workout experience. Combining innovative technology with robust features, this treadmill caters to runners of all levels, whether you’re a novice or a seasoned marathoner.

One of the standout features of the NEL70950 is its impressive Incline and Decline capabilities. With a maximum incline of 15% and a decline option of -3%, this treadmill allows users to simulate real-world running conditions. The incline helps to engage different muscle groups, providing a more comprehensive workout that can enhance performance.

Equipped with a powerful 3.5 CHP motor, the NEL70950 delivers a smooth and quiet operation, allowing users to enjoy their workout without distractions. The spacious running surface of 22 inches wide by 60 inches long accommodates even the longest strides, making it suitable for users of varying heights and leg lengths.

The NEL70950 integrates iFit technology, providing access to a vast library of interactive workouts led by personal trainers. Users can participate in global workouts with scenic routes, challenging their limits while enjoying the scenic vistas displayed on the treadmill's large 10-inch touchscreen display. The screen also tracks essential workout metrics like speed, distance, time, and calories burned, ensuring users can monitor their progress effectively.

Safety is a priority with the NordicTrack NEL70950, featuring a SecureDeck cushioning system that reduces impact on joints. This technology minimizes stress on knees and ankles, making it ideal for those recovering from injuries or engaging in longer runs.

In terms of design, the NEL70950 is both sleek and functional. It features a foldable design, allowing for easy storage when the treadmill is not in use. The built-in transport wheels make it simple to move the treadmill around if needed.

Another impressive aspect of the NordicTrack NEL70950 is its Bluetooth compatibility, enabling users to connect their devices for an immersive workout experience. Additionally, it comes equipped with speakers, allowing users to enjoy their favorite music or podcasts while exercising.

Overall, the NordicTrack NEL70950 stands out as a high-performance treadmill packed with features designed to enhance any fitness journey. Its blend of powerful technology, user-friendly design, and innovative engagement tools makes it a valuable addition to any home gym. With the NEL70950, achieving fitness goals is not only attainable but also enjoyable.

NordicTrack NEL70950 user manual Do not pinch, Harnesses, During this, Step

Models: NEL70950

Do not pinch

harnesses

during this

step.

NEL70950 specifications