![](/images/new-backgrounds/1271084/27108415x1.webp)
8.Attach the
Locknuts yet.
Repeat this step with the Left Top Frame (not shown).
Tighten the M10 Nylon Locknuts (64) used in steps
9.Locate the Medium Cable (45), which has an eyelet on each end. Attach the Cable inside the Center Top Frame (9) with an M10 x 165mm Button Head Bolt (5) and an M10 Nylon Locknut (64).
10.Wrap the Medium Cable (45) under a 3 1/2” Pulley (34). Attach the Pulley and a Cable Trap (36) between the second set of holes from the top of the pair of Pulley Plates (33) with an M10 x 50mm Button Head Bolt (57) and an M10 Nylon Locknut (64). Make sure the Cable Trap is ori- ented to hold the Cable in the groove of the Pulley.
11.Wrap the Medium Cable (45) over a 3 1/2” Pulley (34), as shown. Attach the Pulley inside the Center Top Frame (9) with an M10 x 165mm Button Head Bolt (5) and an M10 Nylon Locknut (64).
8 | 64 | 62 |
|
| 8 | ||
|
| ||
|
|
| |
|
|
| 10 |
|
|
| 52 |
9 |
|
|
|
|
| 64 | 9 |
|
|
| 5 |
|
|
| 45 |
10 |
|
|
|
|
|
| 45 |
|
| 64 | 34 |
|
|
| |
|
|
| 57 |
|
| 33 |
|
|
| 36 |
|
|
|
| 33 |
11 |
|
|
|
|
|
| 34 |
|
|
| 45 |
|
| 64 | 9 |
|
|
| 5 |
8