NordicTrack NTC4015.2 Pulse Wires 51, Locknuts before you tighten any of them, To avoid, Pinching

6.While another person holds the Console (4) near the Upright (2), connect the Upper Wire Harness (42) to the wire harness on the Console, and connect the Pulse Extension Wire (51) to the pulse wire on the Console. Insert the excess wiring into the Upright. Attach the Console (4) to the Upright (2) with four M4 x 16mm Round Head Screws (80). Be careful to avoid pinching the wires and wire harnesses.

7.Hold the Right Handlebar (5) near the Upright (2), and connect the Pulse Extension Wire (51) to the Pulse Wire (75).

Attach the Right Handlebar (5) to the Upright (2) with two M6 x 36mm Button Bolts (76) and two M6 Nylon Locknuts (72). Be careful to avoid damaging the

Pulse Wires (51, 75).

Attach the Left Handlebar (3) to the Upright (2) in the same way.

8.Attach the Backrest (8) to the Seat Bracket (11) with four M8 x 41mm Button Bolts (78) and four M8 Nylon Locknuts (10). Start all four Button Bolts and Nylon

Locknuts before you tighten any of them.

6					4
					Be careful
	80				to avoid
					pinching
	42				the Wire
80			251		Harnesses.
7				76
3		51	75	72		5
	2
				Be careful to
			avoid pinching
				the Pulse
					Wires.
8
					8
	78
					11	10
	10

6