NordicTrack NTC59020 user manual HOW to Connect Your VCR, Adapter Audio Cable

HOW TO CONNECT YOUR VCR

Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 16.

A. Plug one end of the audio cable into the jack beneath the console. Plug the other end of the cable into the adapter. Plug the adapter into the AUDIO OUT jack on your VCR.

A
	ANT. IN
VIDEO AUDIO
IN
	RF OUT
CH
3	4
OUT
AUDIO OUT
RIGHT
LEFT
Adapter
Audio Cable

B. Plug one end of the audio cable into the jack beneath the console. Plug the other end of the cable into the adapter. Plug the adapter into an RCA Y-adapter (available at electronics stores). Next, remove the wire that is currently plugged into the AUDIO OUT jack on your VCR and plug the

wire into the unused side of the Y-adapter. Plug the Y-adapter into the AUDIO OUT jack on your VCR.

B
		ANT. IN
	VIDEO AUDIO
	IN
		RF OUT
	CH
	3	4
	OUT
	RCA Y-adapter
Audio Cable	Adapter
Wire removed from
AUDIO OUT jack

17