![](/images/new-backgrounds/1222305/2223057x1.webp)
ASSEMBLY
Make Things Easier for Yourself
Everything in this manual is designed to ensure that the exercise bench can be assembled suc- cessfully by anyone. Most people find that by setting aside plenty of time, assembly will go smoothly.
Before beginning assembly, carefully read the following information and instructions:
•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
•Tighten all parts as you assemble them, unless instructed to do otherwise.
•As you assemble the exercise bench, make sure all parts are oriented as shown in the drawings.
•Assembly requires two people.
The following tools (not included) are required for assembly:
• two adjustable wrenches
• one standard screwdriver
• one Phillips screwdriver
• one Rubber Mallet
Assembly will be more convenient if you have a socket set, a set of
1.Tighten the Adjustment Knob (17) into the hole in the bottom of Outer Frame (1), and engage the adjustment hole in the Inner Frame (2).
2. Insert a Pulley Tube (12) into the end of the Outer Frame (1). Tighten the Pulley Tube into the top of a Wheel Leg (13). Note: Be sure that the Wheel
(19)attached to the Wheel Leg is parallel to the Carriage (6), and that the holes in the Pulley Tube are parallel to the end of the Outer Frame, as shown.
Attach the other Pulley Tube (12) and Wheel Leg (13) in the same manner.
1 |
|
1 | 2 |
| |
17 |
|
2 |
|
12 |
|
12 |
|
| 6 |
1 |
|
13 |
|
13 |
|
19 |
|
4