ASSEMBLY
Assembly requires two people. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do notdispose of the packing materials until assembly is completed. Inaddition to the four
included allen wrenches, assembly requires a phillips screwdriver _=_, two adjustable
wrenches_,arubbermalletcz21211 2: -_,andpliers_"
As you assemble the elliptical exerciser, use the drawings below to identify the small parts used in assembly.
The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on
pages 24 and 25. The second number refers to the quantity used in assembly. Note: Some small parts may
have been pre-assembled. Ifa part is not in the parts bag, check to see if it is pre-assembled.
M6 Washer MIO Split Spacer (109)-2 M8Jam Nut M4x 12mm
(64)-2 Washer (73)-2 (86)-6 Screw (96)-1 M6 x 16mm Patch
Screw (76)-4
M8 x 38mm Button
Bolt (105)-2 M8x41mm Button
Bolt (85)-4 M8 x 58mm Button Screw (83)-4
M8 x44mm Button Screw (84)-8 M10 x78mm Bolt Set (65)-2
MIO x 110mm Button Screw (70)-2
1. Identify the Front Stabilizer (8). While another person
lifts the front of the Frame (1) and holds the Pedal
Legs (4, 5)in the position shown, attach the Front
Stabilizer to the Frame with four M8 x 44mm Button
Screws (84) and a Support Plate (104) as shown.
84
8