HOW TO USE A WEIGHT LOSS WORKOUT
1.Begin pedaling or press any button on the console to turn on the console.
A moment after you begin pedaling or press a but- ton, a tone will sound, and the display will light.
2.Select a weight loss workout.
rent segment. At the end of each segment of the workout, a series of tones will sound and the next segment of the profile will begin to flash. If a differ- ent resistance level is programmed for the next segment, the resistance level will appear in the display for a few seconds to alert you. The resis- tance of the pedals will then change.
If the resistance level for the current segment is too high or too low, you can manually override the
To select a weight loss workout, press the desired Weight Loss button. The workout time and a profile of the resis- tance levels for the workout will also appear in the dis- play.
t'l,t_t'lt'31_
U'UU U.U
TIMESPEED
_.._a_d
Profile
setting by pressing the Silent Magnetic Resistance buttons, iMPORTANT: When the current seg- ment of the workout ends, the pedals will automatically adjust to the resistance level programmed for the next segment.
The workout will continue in this way until the last segment ends. To stop the workout at any time, stop pedaling. A tone will sound and the time will stop counting. To restart the workout, simply resume pedaling.
3.Begin pedaling to start the workout.
Each workout is divided into 30
The resistance level for the first segment will appear in the display for a few seconds. During the workout, the workout profile will show your progress (see the drawing above). The flashing segment of the profile represents the current seg- ment of the workout. The height of the flashing segment indicates the resistance level for the cur-
4.Follow your progress with the display.
See step 4 on page 15.
5.Measure your heart rate if desired.
See step 5 on page 16.
. When you are finished exercising, the console will turn off automatically.
See step 6 on page 16.
18
