NordicTrack NTEL7506.0 user manual To damage the Upper Wire Harness

5. Orient the Left and Right Upright Covers (19, 20)	5
as shown. Then, attach the Upright Covers
around the Upright (10) with five M4 x 16mm
Round Head Screws (80).
				80
	80		20
			10
	80	19
6. Apply a generous amount of the included grease	6
to the Upper Body Axle (71). Insert the Upper			65
				96	85
Body Axle into the Upright (10). Be careful not			Grease
to damage the Upper Wire Harness (65).
Apply a small amount of grease to a Wave		10	71
Washer (101). Slide the Wave Washer onto the
	Grease		101	72
left end of the Upper Body Axle (71).
Identify the Left Upper Body Leg (24), which is	96
marked with a sticker, and orient it as shown.
	85	101
Slide the Left Upper Body Leg onto the left side
of the Upper Body Axle (71).
Attach the Left Upper Body Leg (24) to the Upper	24
Body Axle (71) with an M8 x 19mm Button
Screw (85) and an M8 x 23mm x 2mm Washer
(96).
Repeat this step for the Right Upper Body
Leg (72).
	7