5.Identify the Left Pedal (19) (there is an “L” on the Left Pedal for identification). Using an adjustable wrench, firmly tighten the Left Pedal counterclock- wise into the Left Crank Arm (26). Tighten the Right Pedal (not shown) clockwise into the Right Crank Arm (not shown). Important: Tighten both Pedals as firmly as possible. After using the exercise cycle for one week, retighten the Pedals. For the best performance, the Pedals must be kept prop- erly tightened.
6.The Console (4) requires two “AA” batteries (not included). Alkaline batteries are recommended. To install batteries, locate the battery cover on the back of the Console. Remove the battery cover and insert two batteries into the Console. Make sure that the negative ends of the batteries (marked
5 |
26 |
19 |
6 |
Battery |
Cover |
4 |
Battery |
Compartment |
7.Make sure that all parts are tightened before you use the exercise cycle. Note: There may be some hardware left over after assembly is completed. Place a mat under the exercise cycle to protect the floor or carpet from damage.
6
