NordicTrack NTEX4196.0 Screws 80. Be careful to avoid pinching Wires 42, During this step

6.Attach the Handlebar (39) to the Upright (2) with four M6 x 30mm Button Screws (37).

7.While another person holds the Console (4) near the Handlebar (39), connect the console wire harness to the Upper Wire Harness (42). Next, connect the pulse wire on the Console to the Pulse Wire (51) in the Handlebar. Note: The remaining wire (not shown) on the Console is used during the manufacturing process; disregard this wire.

Insert the excess wiring downward into the Upright (2). Attach the Console (4) to the Handlebar (39) and the Upright with four M4 x 16mm Round Head

Screws (80). Be careful to avoid pinching the

Wires (42, 51).

8.Slide the Bottom Handlebar Cover (18) into the slots in the bottom of the Console (4). Attach the Bottom Handlebar Cover to the Handlebar (39) and the Top Handlebar Cover (84) with two M4 x 16mm Round Head Screws (80) and one M4 x 12mm Screw (25).

6
2					37
		39			37
7
	Console Wire
80	Harness
	42
80
2	39	51	Pulse		4
			Wire
			Avoid pinching
			the Wires (42, 51)
			during this step.
8	84
	4
				39
				Slots
				18
			80	25 80

6