NordicTrack NTL10805.2 manual Information MODE/DEMO Mode, HOW to Adjust the Cushioning System

THE INFORMATION MODE/DEMO MODE

The console features an information mode that keeps track of the total number of miles that the walking belt has moved and the total number of hours that the treadmill has been operated. The information mode also allows you to select miles or kilometers as the unit of measurement and to turn on and turn off the demo mode.

To select the information mode, hold down the Stop button while inserting the key into the console.

HOW TO ADJUST THE CUSHIONING SYSTEM

The treadmill features a cushioning system that re- duces the impact as you walk or run on the treadmill. To increase the firmness of the walking platform, step off the treadmill and slide the cushion adjustors toward the front of the treadmill. To decrease the firmness, slide the cushion adjustors toward the back of the treadmill. Note: It may be helpful to lift on the plat- form as you slide the adjustors. Make sure that both adjustors are set at the same firmness level. The faster you run on the treadmill, or the more you weigh, the firmer the walking platform should be.

The Calories/Distance dis-
play will show the total num-
ber of miles (or kilometers)
that the walking belt has	Cushion
moved.	Adjustor
The Time/Pace display will	Increase
show the total number of
hours that the treadmill has
been used.	Decrease	Cushion
		Adjustor
An “E” for English miles or an		Platform
“M” for metric kilometers will
appear in the Pulse/Speed
display. Press the Speed in-	THE OPTIONAL CHEST PULSE SENSOR
crease button to change the
unit of measurement.	An optional chest pulse sensor adds even more fea-
	tures to the console. The chest pulse sensor offers
IMPORTANT: If a “d” appears in the Carbs/Incline dis-	hands-free operation, and enables you to use the two
play, the console is in the “demo” mode. This mode is	heart rate programs. To purchase the optional chest
intended to be used only when a treadmill is displayed	pulse sensor, call the toll-free telephone number
in a store. When the console is in the demo mode, the	on the front cover of this manual.
power cord can be plugged in, the key can be removed
from the console, and the indicators in the display will
automatically light in a preset sequence, although the
buttons on the console will not operate. If a “d” appears
when the information mode is selected, press the
Speed decrease button so the “d” disappears.

To exit the information mode, remove the key from the console.

22