![](/images/new-backgrounds/1290014/29001421x1.webp)
11. See drawing 11a. Remove the indicated 3/4" | 11a | 11b |
|
| |
| Screw (7) from the right Handrail (70). |
| Console | ||
|
|
|
| ||
|
|
|
|
| Assembly |
| See drawing 11b. Slide the Right Upright Sleeve |
|
|
|
|
| (9) up to the console assembly. Attach the Right |
|
|
|
|
| Upright Sleeve with two 1" Tek Screws (82) and |
|
|
|
|
| the 3/4" Screw (7) as shown. | 70 |
|
|
|
| Attach the Left Upright Sleeve (not shown) in the |
|
| 7 |
|
| same way. |
|
|
| |
| 7 |
|
|
| |
|
|
| 9 |
| |
|
|
|
| 82 | |
|
|
|
|
| |
12 | With the help of a second person, carefully | 12 |
|
|
|
| lower the Uprights (85) to the position shown. |
|
|
| |
|
|
|
|
| |
| Attach the Right Base Cover (86) with three 3/4" |
|
|
|
|
| Screws (7) and two Base Cover Screws (63). |
|
|
|
|
| Start all five Base Cover Screws and then |
| 85 |
|
|
| tighten them. Be careful not to overtighten |
|
|
| |
|
|
|
|
| |
| the Base Cover Screws. Attach the Left Base |
|
|
| 7 |
| Cover (88) in the same way. |
|
|
| |
|
|
|
|
| |
| With the help of a second person, carefully raise |
|
|
| 88 |
| the Uprights (85) to the vertical position. |
|
|
| |
|
|
|
| 63 | |
|
|
|
|
| |
|
|
| 7 |
|
|
|
|
| 86 |
|
|
|
|
| 63 |
|
|
13. Note the location of the 75 ohm terminal on the | 13 |
|
|
| |
| treadmill. For the television to operate, an |
|
|
| |
|
|
|
|
| |
| audio/video wire must be connected to the |
|
|
|
|
| audio/video input jack on the treadmill, a per- |
|
|
|
|
| sonal audio/video player must be connected to |
|
|
|
|
| the audio/video jack on the console, or a CATV |
|
|
|
|
| cable must be connected to the 75 ohm terminal |
|
|
|
|
| (see page 13). |
|
|
|
|
|
|
|
|
| 75 Ohm |
|
|
|
|
| Terminal |
14.Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key in a secure place. The hex key is used to adjust the walking belt (see page 30). To protect the floor or car- pet from damage, place a mat under the treadmill.
11