PROBLEM: The walking belt is |
|
SOLUTION: a. If the walking belt is | a |
UNPLUG THE POWER CORD. If the walking belt | |
has shifted to the left, use the hex key to turn the |
|
left idler roller bolt clockwise 1/2 of a turn; if the walk- |
|
ing belt has shifted to the right, turn the bolt coun- |
|
terclockwise 1/2 of a turn. Be careful not to over- |
|
tighten the walking belt. Plug in the power cord, insert |
|
the key, and run the incline trainer for a few minutes. |
|
Repeat until the walking belt is centered. |
|
b. If the walking belt slips when walked on, first remove | b |
the key and UNPLUG THE POWER CORD. Using | |
the hex key, turn both idler roller bolts clockwise, 1/4 |
|
of a turn. When the walking belt is correctly tightened, |
|
you should be able to lift each edge of the walking |
|
belt 3 to 4 in. (8 to 10 cm) off the walking platform. Be |
|
careful to keep the walking belt centered. Then, plug |
|
in the power cord, insert the key, and carefully walk |
|
on the incline trainer for a few minutes. Repeat until |
|
the walking belt is properly tightened. |
|
PROBLEM: The console display has lines running through it |
|
SOLUTION: a. If lines appear in the console display, see THE INFORMATION MODE on page 20 and adjust the | |
contrast level of the display. |
|
25
