NordicTrack NTL1895.1 user manual Legs 90 remain in place

Models: NTL1895.1

1 38
Download 38 pages 57.99 Kb
Page 7
Image 7

2.With the help of a second person, carefully tip the Uprights (20) and the Walking Platform (not shown) down to the position shown. Make sure that the Extension

Legs (90) remain in place.

Attach the Extension Legs (90) with four Extension Screws (87); start all four Extension Screws before tightening them.

Next, attach the four Base Pads (81) to the base of the Uprights (20) in the locations shown with four 1” Tek Screws (82). Note: One replacement Base Pad may be in- cluded. Use the Base Pad to replace any Base Pad that becomes worn.

With the help of a second person, carefully tip the Uprights (20) back to the vertical position.

3.Cut the tie securing the Pulse Wire (74) to the right Upright (20). Next, hold the Pulse Bar Assembly (69) near the crossbar on the Uprights. Connect the Pulse Wire to the wire in the Pulse Bar Assembly. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. Then, insert the wires into the crossbar.

Open parts bag B. Attach the Pulse Bar Assembly (69) to the crossbar on the Uprights (20) with four Pulse Bar Bolts (13) and four Star Washers (67). Start all four Pulse Bar Bolts before tightening them. Make sure that no wires are pinched.

4.Cut the tie securing the wires to the right Upright (20). Have a second person hold the console assembly near the Uprights. Connect the Upright Wire Harness (73) and the Pulse Wire (74) to the wires extending from the console as- sembly. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. Insert the connectors into the console as- sembly. If necessary, remove the right accessory tray (not shown) from the console assembly.

Connect the Upright Ground Wire (88) to the ground wire extending from the console assembly. Make sure that the wires are fully inserted into each other. Insert the ground wires into the console assembly. Reinsert the right acces- sory tray (not shown) into the console assembly if neces- sary.

2

 

 

 

 

 

 

81

 

 

 

82

81

82

 

87

20

90

 

 

 

 

 

 

 

87

 

 

 

90

 

3

 

 

 

 

 

13

 

 

 

67

 

 

 

Crossbar

 

 

 

13

 

 

 

67

 

 

 

74

 

 

69

 

 

 

 

20

 

 

74

 

4

 

 

 

Console

 

 

Assembly

 

 

Ground

74

Wire

 

88

73

73

20 74

7

Page 7
Image 7
NordicTrack NTL1895.1 user manual Legs 90 remain in place