HOW to USE the Chest Pulse Sensor

HOW TO PUT ON THE CHEST PULSE SENSOR

The chest pulse sensor consists of two components— the chest strap and the sensor unit.

	Chest Strap
Tabs
	Tab
Sensor Unit	Sensor	Buckle
	Unit	Buckle
	Unit

Insert the tab on one end of the chest strap into the hole in one end of the sensor unit, as shown in the inset drawing above. The tab should be flush with the front of the sensor unit.

Next, wrap the chest pulse sensor around

your chest and attach the other end of the chest strap to the

sensor unit. Adjust the length of the chest strap, if neces-

sary. The chest pulse

sensor should be under your clothes, tight against your skin, and as high under the pectoral muscles or breasts as is comfortable. Make sure that the logo on the sensor unit is facing forward and is right-side-up.

Pull the sensor unit away from your body a few inches and locate the two electrode areas on the inner side (the electrode areas are covered by shallow ridges). Using saline solution such as saliva or contact lens so- lution, wet both electrode areas. Return the sensor unit to a position against your chest.

CHEST PULSE SENSOR CARE AND MAINTENANCE

•Thoroughly dry the chest pulse sensor after each use. The chest pulse sensor is activated when the electrode areas are wetted and the heart rate monitor is put on; the chest pulse sensor shuts off when it is removed and the electrode areas are dried. If the chest pulse sensor is not dried after each use, it may remain activated longer than nec- essary, draining the battery prematurely.

•Store the chest pulse sensor in a warm, dry place. Do not store the chest pulse sensor in a plastic bag or other container that may trap moisture.

•Do not expose the chest pulse sensor to direct sunlight for extended periods of time; do not expose it to temperatures above 122° F (50° C) or below 14° F (-10° C).

•Do not excessively bend or stretch the sensor unit when using or storing the chest pulse sensor.

•Clean the sensor unit using a damp cloth—never use alcohol, abrasives, or chemicals. The chest strap may be hand washed and air dried.

CHEST PULSE SENSOR TROUBLESHOOTING

The instructions on the following pages explain how the chest pulse sensor is used with the con- sole. If the chest pulse sensor does not function properly, try the steps below.

•Make sure that you are wearing the chest pulse sen- sor as described at the left. Note: If the chest pulse sensor does not function when positioned as de- scribed, move it slightly lower or higher on your chest.

•Use saline solution such as saliva or contact lens solution to wet the two electrode areas on the sensor unit. If heart rate readings do not appear until you begin perspiring, rewet the electrode areas.

•As you walk or run on the treadmill, position your- self near the center of the walking belt. For the console to display heart rate readings, the user must be within arm’s length of the console.

•The chest pulse sensor is designed to work with people who have normal heart rhythms. Heart rate reading problems may be caused by medical conditions such as premature ventricular contrac- tions (pvcs), tachycardia bursts, and arrhythmia.

•The operation of the chest pulse sensor can be affected by magnetic interference caused by high power lines or other sources. If it is suspected that this is a problem, try relocating the treadmill.

NTL19007.0 specifications

The NordicTrack NTL19007.0 is a cutting-edge treadmill designed to provide users with an engaging and effective workout experience. This innovative fitness machine is packed with features and technologies that cater to the needs of both beginners and experienced athletes alike.

One of the standout features of the NTL19007.0 is its impressive 10-inch Smart Touchscreen display. This high-definition screen not only allows users to monitor their workouts but also provides access to iFit, NordicTrack's interactive training platform. With iFit, users can join live classes, follow scenic routes around the world, and receive personalized training programs tailored to their individual fitness goals. The integration of iFit ensures that workouts remain varied and exciting, preventing the monotony that often comes with traditional treadmill workouts.

The treadmill is equipped with a robust motor that provides a smooth and quiet operation, allowing users to run at speeds up to 10 mph. Additionally, the incline function of the NTL19007.0 allows users to adjust the workout intensity by simulating hill climbs, with options for incline settings reaching up to 10%. This feature not only enhances calorie burn but also engages different muscle groups, contributing to a well-rounded fitness routine.

Comfort is also a key consideration in the design of the NordicTrack NTL19007.0. The treadmill is equipped with FlexSelect cushioning, which provides the option to adjust the level of cushioning to accommodate the user’s preference. With this feature, runners can choose between a firmer surface for better stability or a softer surface for reduced impact on joints, making it an excellent choice for individuals recovering from injuries or those concerned about joint health.

Safety features, such as the large safety key and stable handrails, are incorporated into the design to provide peace of mind during workouts. The NTL19007.0 also features a space-saving design with a foldable structure, making it easy to store when not in use, which is a valuable asset for those with limited space in their homes.

In conclusion, the NordicTrack NTL19007.0 treadmill combines advanced technology with essential fitness features to create a versatile and user-friendly workout machine. With its smart touchscreen, iFit compatibility, adjustable incline, customizable cushioning, and space-saving design, it is an ideal choice for anyone looking to elevate their fitness routine from the comfort of their home. With this treadmill, users can enjoy a comprehensive and personalized workout experience that keeps them motivated and engaged.

NordicTrack NTL19007.0 HOW to USE the Chest Pulse Sensor, HOW to PUT on the Chest Pulse Sensor

Models: NTL19007.0