4.With the help of a second person, hold the con- sole assembly near the Uprights (73, 74).
Remove the tie from the Upright Wire Harness (75).
Connect the Upright Wire Harness (75) to the Console Wire Harness (71). See the inset draw- ing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNEC-
TORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON.
4 | Console |
|
|
| |
| Assembly |
|
|
| 73 |
|
| 71 |
|
| 75 |
|
| Tie |
| 75 | 74 |
|
| |
|
| 71 |
5. Connect the TV Cable (49) and the AV Wire | 5 | Console |
|
(97) to the cables extending from the console |
| ||
| Assembly |
| |
assembly. Then, insert the connectors down into |
|
| |
| 99 |
| |
the Uprights (73, 74). |
|
| |
Next, insert the brackets on the Handrails (99) |
|
| 49 |
into the Uprights (73, 74). Make sure that no |
| 97 | |
wires are pinched. |
|
| |
|
|
| |
|
| 73 | 99 |
|
|
| 74 |
6. Finger tighten three Handrail Bolts (64) with | 6 |
|
|
three Upright Star Washers (90) into the Right |
|
| |
|
|
| |
Upright (74). Next, finger tighten three Handrail |
|
|
|
Bolts with three Upright Star Washers (not |
|
|
|
shown) into the Left Upright (73). Then, firmly |
| 73 |
|
tighten the six Handrail Bolts. |
|
|
|
|
|
| 64 |
|
|
| 90 |
|
|
| 74 |
|
|
| 90 |
|
|
| 64 |
| 8 |
|
|
