7. Slide the Right Upright Sleeve (96) up against

7

 

 

the console assembly. Attach the Right Upright

 

 

 

 

 

Sleeve with two 3/4" Screws (4).

 

 

 

Attach the Left Upright Sleeve (not shown) to

 

 

 

the Left Upright (73) in the same way.

73

 

 

 

 

 

4

 

 

 

96

 

 

4

74

 

 

 

8. With the help of a second person, raise the

8

 

 

front of the treadmill and insert the crossbar on

 

 

 

 

 

the Base (83) into the cutout in the cardboard

 

 

 

stand as shown. Have the second person

 

 

 

hold the treadmill to prevent it from moving

 

 

 

forward or backward.

 

 

 

Firmly tighten the four Upright Bolts (72).

 

 

72

 

 

 

With the help of a second person, lower the

 

 

 

treadmill off the cardboard stand.

 

 

 

 

 

83

Cardboard

 

72

 

 

 

Stand

 

 

 

9. Note the location of the 75 ohm terminal and the

9

 

 

audio/video input jack on the treadmill. For the

 

 

 

 

 

television to operate, the Audio/Video Wire

 

 

Audio/

Harness (115) must be connected to the

 

 

Video

audio/video input jack on the treadmill, a per-

 

 

Input

sonal audio/video player must be connected to

 

 

 

the audio/video jack on the console, or a CATV

 

 

 

cable must be connected to the 75 ohm terminal

 

 

75 Ohm

(see page 10).

 

 

 

 

 

Terminal

 

 

 

115

10.Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see page 27). To protect the floor or car- pet from damage, place a mat under the treadmill.

9

Page 9
Image 9
NordicTrack NTL19007.1 user manual