NordicTrack NTTL09994 user manual Assembly, and your own phillips screwdriver and wire cutters

Models: NTTL09994

1 30
Download 30 pages 37.94 Kb
Page 6
Image 6
ASSEMBLY

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench

and your own phillips screwdriver and your own phillips screwdriver  and wire cutters  . and wire cutters Extension Legs (102) remain in the Uprights. .

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

1.With the help of a second person, carefully raise the Uprights (69) until the treadmill is in the position shown

Insert one of the Extension Legs (102) into the treadmill as shown in the inset drawing. Make sure that the Extension Leg is turned so the Base Pad (99) is on the bottom. Note: It may be helpful to tip the Uprights (69) forward as you insert the Extension Leg.

Insert the other Extension Leg (not shown) in the same way.

2.Press the Lock Knob Sleeve (70) into the left Upright (69).

Make sure that the Lock Pin Collar (72) and the Spring (71) are on the Lock Pin. Insert the Lock Pin (74) into the Lock Knob Sleeve (70) and the left Upright (69). Next, press the Lock Knob Spacer (117) onto the left Upright. Tighten the Lock Knob (68) onto the Lock Pin.

3.With the help of a second person, carefully tip the Uprights (69) down as shown. Make sure that the

Extension Legs (102) remain in the Uprights.

Attach each Extension Leg (102) with two Extension Leg Screws (111) as shown.

With the help of a second person, carefully tip the

Uprights (69) back to the vertical position.

Note: One replacement Base Pad (99) may be included. Use the Base Pad to replace any Base Pad that becomes worn.

6

1

 

 

 

 

69

 

 

69

 

 

102

 

 

99

2

 

 

 

 

69

68

 

 

 

 

70

 

117

71

 

72

 

 

 

 

74

3

 

 

 

 

99

69

 

69

 

111

 

 

 

 

102

99

 

111

 

102

 

 

Page 6
Image 6
NordicTrack NTTL09994 user manual Assembly, and your own phillips screwdriver and wire cutters