
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own phillips screwdriver , adjustable wrench
, and wire cutters
.
Note: The underside of the treadmill walking belt is coated with
1. With the help of a second person, carefully raise the | 1 |
|
|
|
Uprights (110) to the position shown. |
|
|
| |
|
|
|
| |
Refer to the inset drawing. Insert one of the Extension |
|
|
|
|
Legs (88) into the treadmill as shown. Make sure that |
|
| 110 |
|
the Extension Leg is turned so the Thick Base Pad (90) |
|
|
|
|
is on the bottom. Note: It may be helpful to tip the |
|
|
|
|
Uprights (110) forward as you insert the Extension Leg. |
|
|
|
|
Insert the other Extension Leg (not shown) in the same |
|
|
| 110 |
way. |
|
|
|
|
|
|
|
| 88 |
|
|
|
| 90 |
2. With the help of a second person, carefully tip the | 2 |
|
|
|
Uprights (110) down as shown. Make sure that the |
|
|
| |
Extension Legs (88) remain in the Uprights. |
|
| 90 |
|
Attach each Extension Leg (88) with two Base Screws |
| 90 |
| |
|
|
| ||
|
|
|
| |
(86) and a Base Pad (75) as shown. |
|
|
|
|
With the help of a second person, carefully tip the |
|
|
| 90 |
|
|
|
| |
Uprights (110) back to the vertical position. | 110 |
| 110 |
|
Note: One replacement Base Pad (90) may be included. |
| 88 | 86 | |
|
| |||
If a Base Pad needs to be replaced, use the replacement | 90 | 86 |
| 90 |
Base Pad. |
| |||
|
|
| ||
90 |
|
|
| |
| 88 |
|
| |
|
|
|
| |
3. Refer to drawing 3a. While another person holds the | 3a |
|
|
|
Handrails (89), thread Handrail Bolts (111) about |
|
|
| |
|
|
|
| |
turns into the two holes in each Handrail. Then, remove |
| 89 |
|
|
the Handrail Bolts. |
|
|
|
|
Refer to drawing 3b. Pinch the tabs on the Grounding |
|
|
|
|
Bracket (115) so that the tabs will fit into the indicated |
|
| 111 |
|
hole in the left Upright (110). Then, insert the Grounding |
|
|
| |
|
|
|
| |
Bracket into the hole as far as possible. | 3b |
|
|
|
| 115 |
|
| |
Note: It may be helpful to set the Handrails (89) on the |
| 110 |
| |
|
|
| ||
Uprights (110) and loosely thread a Handrail Bolt (111) |
|
| 111 | |
into the left Upright and the left Handrail. Tip the |
|
| ||
Handrails, if necessary, to thread in the Bolt. Have an- |
|
|
|
|
other person support the Handrails as you complete the |
|
|
|
|
remaining steps. |
|
|
|
|
6