6. SYMPTOM: THE DISPLAYS OF THE CONSOLE DO NOT FUNCTION PROPERLY

a. Remove the screws

from the hood. Carefully remove the hood.

Locate the Reed Switch (74) and the Magnet (95) on the left side

of the Pulley (17). Turn the Pulley until the Magnet is aligned with

the Reed Switch.

Make sure that there is a 1/8”gap between

the Magnet and the Reed Switch.

If necessary, loosen the

Screw (90) and move the Reed Switch slightly. Retighten the Screw. Re-attach the hood, and run the treadmill for a few min- utes to check for a correct speed reading.

1/8”

17

90

 

74

95

 

Top

 

View

 

17

Page 17
Image 17
NordicTrack NTTL90080 manual From the hood. Carefully remove the hood, Magnet and the Reed Switch