If the combustion and circulating air blowers are operating, and items 1 through 6 have been checked without identifying the cause of the problem, press the red reset buttons on the vent safety and the roll out limit switches. (See Figures 1, 2, 3 and 4).

IMPORTANT: If the furnace operates after depressing the reset button on the vent limit or roll out limit, it is an indication of a potentially serious problem in the installation. Contact a qualified serviceman to identify and repair the problem.

MANUFACTURER WARRANTY, OWNER RESPONSIBILITIES

It is the sole responsibility of the homeowner to make certain the gas furnace has been correctly set up and adjusted to operate properly.

The Manufacturer warrants the furnace to be free from defects in material or workmanship for the warranty period. However, the Manufacturer will not be responsible for any costs found necessary to correct problems due to improper set-up, improper installation, furnace adjustments, improper operating procedure on the part of the user, etc.

Some specific examples of service calls which cannot be included in warranty payments are:

1.Repairing duct work in the home found to be faulty.

2.Correcting wiring problems in the electrical circuit supplying the furnace.

3.Re-setting circuit breakers or other switches.

4.Correction of problems due to improper gas supply pressure to the furnace.

5.Providing instructional training on how to light and operate the furnace.

6.Furnace problems caused by installation of an air conditioner, heat pump, or other air comfort devices.

7.Revising installation of the vent assembly.

8.Adjusting or calibrating of the thermostat.

Carefully review these responsibilities with your dealer, service company, or gas supplier so there will be no misunderstanding at a later time.

Read Your Warranty

Please read your limited warranty completely. It contains valuable information about your furnace. If you have any questions about the warranty information, contact your distributor.

11

Page 10 Page 12
Page 11
Image 11
Nordyne Residential Gas Furnaces manual Manufacturer WARRANTY, Owner Responsibilities, Read Your Warranty
Page 10 Page 12

Residential Gas Furnaces specifications

Nordyne Residential Gas Furnaces are a prominent choice for homeowners seeking reliable heating solutions. Renowned for their efficiency and durability, these furnaces are designed to meet the demands of various climates while ensuring optimal home comfort.

One of the primary features of Nordyne gas furnaces is their high-efficiency ratings. Many models boast AFUE (Annual Fuel Utilization Efficiency) ratings of 90% or higher, which means they convert a significant percentage of gas into usable heat. This efficiency translates to lower energy bills and a reduced environmental footprint. The advanced heat exchangers used in these furnaces allow for efficient heat transfer and improved performance.

Nordyne also incorporates multi-stage heating technology in their gas furnaces. This feature enables the system to adjust its heating output based on the current demand, promoting energy savings and creating a more consistent indoor temperature. The quiet operation of these units ensures that comfort doesn’t come at the expense of noise, making for a peaceful home environment.

Another standout technology in Nordyne gas furnaces is the use of modulating gas valves. These valves control the amount of gas supplied to the burner, allowing the system to operate at varying speeds. Consequently, this results in more precise temperature control and enhanced energy efficiency, as the furnace can run longer at lower capacities instead of cycling on and off frequently.

Durability is a hallmark of Nordyne products. The furnaces are constructed with high-quality materials that resist wear and tear over time, providing reliability that homeowners can depend on during the cold months. Many models also feature a robust warranty, offering peace of mind regarding long-term performance.

Nordyne's commitment to innovation extends to their intelligent controls and smart technology compatibility. Many models can be integrated with home automation systems, allowing users to monitor and adjust their heating remotely. This connectivity enhances convenience and energy management.

In addition, Nordyne gas furnaces are designed with easy maintenance in mind. Features like accessible filter locations and diagnostic controls simplify routine upkeep, contributing to the longevity of the unit.

In conclusion, Nordyne Residential Gas Furnaces stand out for their energy efficiency, advanced technologies, durability, and user-friendly features. Homeowners can feel confident investing in these heating solutions, knowing they prioritize comfort, performance, and cost-efficiency.
Top Page Image Contents