BayRS Version 13.03 and Site Manager Software Version 7.03 Release Notes
CR 91925: ATM
Deleting an ATM interface without first deleting the PVC and service record causes a fault to occur.
CR 92237: ATM
Various MCP and VBM errors occur on an ATM interface during a failure recovery.
CR 92475: OSPF
When originating a new AS external LSA that is less specific than an existing LSA, the wrong LSID is used.
92520: X.25
When a configured link is bounced in IPEX, TCP reestablishes the link with another available IP address. This does not work properly in some environments. A new global IPEX MIB parameter, wfIpexTcpUseIpAddress, has been added to allow IPEX to use only the IP address associated with the local TCP port instead of any IP address on the router.
CR 93483: ATM
Random slot disconnects and tag violations occur on an ASE slot.
CR 93936: IP
An adjacent host does not become active across ATM PVC until it is bounced. This occurs when IP adjacent hosts are configured for ATM PVC and the address resolution type for the IP interface is set to ATMARP.
CR 94143: TFTP
Using the Technician Interface to delete TFTP can cause a bus error to occur.
CR 96022: Frame relay
A router configured with frame relay PVCs and hardware compression does not report BECNs received from the frame relay cloud.
