Nikon COOLPIXS60PNK user manual Electronically Controlled Cameras, Shooting, 160, Troubleshooting

Troubleshooting

Problem	Cause/Solution	A
Monitor turns off, and the	Battery temperature is high. Turn off camera,	17
power-on lamp and flash lamp	and allow battery to cool down before resuming
blink rapidly.	use. After the lamps blink for 30 seconds, the
	camera will turn off automatically, but you can
	also press the power switch to turn it off
	manually.

Electronically Controlled Cameras

In extremely rare instances, unusual characters may appear in the monitor and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the battery, then turn the camera on again. In the event of continued malfunction, contact your retailer or Nikon-authorized service representative. Note that disconnecting the power source as described above may result in the loss of any data not recorded to internal memory or the memory card at the time the problem occurred. Data already recorded will not be affected.

Shooting

Technical
	No picture taken when shutter-	•	When camera is in playback mode or menus	28
	Problem		Cause/Solution	A
Notes	release button is pressed.		button.
			are displayed, press the shutter-release
		•	Battery is exhausted.	22
		•	When flash control blinks, flash is charging.	31
	Camera cannot focus.	•	The intended subject is one with which	27
		•	autofocus does not perform well.
			Set AF assist in the setup menu to Auto.	142
		•	Focus error. Turn camera off and then on	22
			again.
	Pictures are blurred.	•	Use flash.	30
		•	Use ISO sensitivity>High ISO sensitivity	123
		•	auto in the shooting menu.
			Use vibration reduction.	142
		•	Use D(Best Shot Selector).	121
		•	Use tripod and self-timer.	32
	Bright specks appear in	Flash is reflecting off particles in air. Turn flash		31
	pictures taken with flash.	off.

160