Charging the Battery

The following chart explains CHARGE lamp status.

CHARGE lamp

Description

Blinks

Battery charging.

On

Battery fully charged.

 

The battery is not inserted correctly. Remove the battery and

 

reinsert it into the battery charger so that the battery is lying flat.

 

Charge the battery indoors with an ambient temperature of

Flickers

5 °C to 35 °C (41 °F to 95 °F) before use.

 

The battery is faulty. Unplug the charger immediately and stop

 

charging the battery. Bring the battery and charger to a Nikon-

 

authorized service representative for inspection.

 

 

First Steps

3Unplug the charger when charging is complete.

Remove the battery and unplug the charger.

BNote on the Battery Charger

The supplied battery charger is for use only with a Rechargeable Li-ion Battery EN-EL10. Do not use with incompatible batteries.

Be sure to read and follow the warnings for the battery charger on page iii before using the battery charger.

If the battery will not be used for an extended period, recharge it at least once every six months and run it flat before returning it to storage.

BNote on the Battery

Be sure to read and follow the warnings for the battery on page iii and the section, “The Battery” (A 153), before using the battery.

CNote on AC power supply

To power the camera continuously for extended periods, use an AC Adapter EH-63 (available separately from Nikon) (A150). Do not, under any circumstances, use another make or model of AC adapter. Failure to observe this precaution could result in overheating or in damage to the camera.

The AC adapter and the supplied audio/video cable or USB cable cannot be used at the same time. 15

Page 27
Image 27
Nikon COOLPIXS60RED, COOLPIXS60PNK, COOLPIXS60BK Unplug the charger when charging is complete, Charging the Battery