Nortel Networks 2332 manual 15.9-mm 5/8 inch T-bar

WLAN—Access Point 2330s 85

1Use the mounting template to cut a hole for the CAT-5 Ethernet cable.

2Install the T-bar clamp that fits the T-bar.

T-bar	Slide together	T-bar
		Slide together
T-bar clamp halves
		T-bar clamp halves

840-9502-0003

23.9-mm (15/16 inch) or 14.2-mm (9/16 inch) T-bar

(The clamps are different widths but the assembly is the same.)

3Remove the mounting bracket from the access point.

840-9502-0011

840-9502-0066

15.9-mm (5/8 inch) T-bar

840-9502-0008

4Attach the mounting bracket to the T-bar clamp.

Universal mounting bracket

T- bar

T-bar clamps (attached to T-bar)

Port connector opening

Port connector	Universal mounting bracket
opening
	T-bar

840-9502-0012

840-9502-0004

(Viewed from above ceiling tiles, looking down.)

Nortel WLAN—Series 2332 Access Points Quick Installation