Table 3 BPS2000-4TX MDA description (continued)
Item Label | Description |
| Off: No traffic to this port. |
3 | 10BASE-T/100BASE-TX RJ-45 |
| (8-pin modular) port connectors. |
| |
100BASE-FX MDAs
The 100BASE-FX MDAs conform to the IEEE 802.3u 100BASE-FX standard and can attach fiber-based 100 Mb/s connections to Fast Ethernet devices. The 100BASE-FX MDAs do not support single-mode fiber cable. The following are the 100BASE-FXMDAs.
•400-2FX MDA (dual-port), page 10
•400-4FX MDA (quad-port), page 13
•8100-2FX MDA (dual-port), page 10
•8100-4FX MDA (quad-port), page 13
•BPS2000-2FX MDA (dual-port), page 12
•BPS2000-4FX MDA (quad-port), page 15
For a complete list of MDAs, see Table 1 on page 4. For installation instructions, see “Installing an MDA” on page 24.
Dual-port 100BASE-FX MDAs
The dual-port 100BASE-FX MDAs use two longwave 1300 nm SC connectors to attach devices over 62.5/125 micron multimode fiber optic cable.
9
