Nortel Networks 4065R manual Setting up the handset, Installing the charger

Setting up the handset

Setting up the handset

Before you use the handset, it is important that you read the safety information and perform the following steps:

•Installing the charger

•“Charging the batteries” on page 11

Installing the charger

Place the charger on a flat, even surface. To operate the charger, a mains connection is required. Ensure that the mains voltage matches the adapter mains voltage.

1.Connect the cable on the plug-in mains adapter to the terminal on the bottom of the charger.

2.Plug the mains adapter into the mains socket outlet.

CAUTION

Do not install the charger, handset, and accessories near:

•water, moisture, sources of heat, or in direct sunlight

•devices that generate strong magnetic fields, electrical appliances, fluorescent lamps, computers, radios, televisions, or fax and telephone terminals

•areas where the handset can be covered, or in locations with poor ventilation

•excessive dust, or areas subject to vibration, shock, or extreme temperature fluctuations

9