Audio settings
Selecting the ringer type
Use this procedure to switch on the ringer signalling function, and specify a full melody or a chirp (a short series of tones). The current selection is indicated by a check mark (o).
To select ringer type:
N
Type
1.Open the Ringer Settings menu as discussed in “Accessing the Ringer Settings menu” on page 54.
2.Press the arrow keys to scroll and highlight the Type option.
OK |
N |
Full Melody
or
Chirp
3.Press the OK soft key.
4.Press the arrow keys to scroll and highlight one of the following:
—Full Melody
—Chirp
OK |
Esc
5.Press the OK soft key.
6.Press the Esc soft key one or more times to return to the idle display.
Selecting the ringer device
Use this function to activate the buzzer (audio alert), vibrator, or headset. The active function is indicated by a check mark (o).
To select ringer device:
N
Device
OK |
1.Open the Ringer Settings menu as discussed in “Accessing the Ringer Settings menu” on page 54.
2.Press the arrow keys to scroll and highlight the Device option.
3.Press the OK soft key.
56
