Manuals / Nortel Networks / Computer Equipment / Switch

Nortel Networks 4500 FIPS Contivity Extranet Switch, Tamper Evident Labels Applied to Rear Panel

Models: 4500 FIPS

1 14

Download 14 pages 23.29 Kb

Page 9

Figure 7 – Tamper Evident Labels Applied to Rear Panel

(2) Top Cover

Labels

(2) Front

Bezel Labels

Figure 6 – Tamper-Evident Labels Applied to Switch Front Bezel and Top Cover

(2) AC Filter

Input Labels

(1) Air Hole Label

(1) I/O Panel

Label

(1) Keyboard

Connector

Label

Figure 7 – Tamper Evident Labels Applied to Rear Panel

The tamper-evident seals are produced from a special thin gauge white vinyl with self-adhesive backing. Any attempt to open the switch will damage or destroy the tamper-evident seals, or the painted surface and metal of the module cover. Since the tamper-evident labels have non- repeated serial numbers, the labels may be inspected for damage and compared against the applied serial numbers to verify that the module has not been tampered with. An intact label is shown in Figure 8, with a visible serial number and no breaks.

FIPS 140-1 Level 2 Tamper Evident Label

Contivity

Extranet

Switch

Serial Number: 5673422

Figure 8 – Tamper-Evident Label

© Copyright 2000 Nortel Networks.

9

Image 9

Nortel Networks 4500 FIPS Contivity Extranet Switch, Tamper Evident Labels Applied to Rear Panel, Tamper-Evident Label

Contents

Level 2 Validation February Contivity Extranet Switch FIPS 140-1 Non-ProprietaryCryptographic Module Security Policy 2 The Contivity Extranet 4500 Switch Table of ContentsCrypto Officer Services User Services1.1 Purpose 1 Introduction1.2 References 1.3 TerminologyThis document provides an overview of the Contivity Switch and explains the secure configuration and operation of the module. This introduction section is followed by Section 2, which details the general features and functionality of the Contivity Switch. Section 3 specifically addresses the required configuration for the FIPS-mode of operation 2 The Contivity Extranet 4500 Switch 2.1 Cryptographic Module2.2 Module Interfaces Figure 3 - LAN Port LEDs Figure 2 - Physical InterfacesSwitch physical interface 2.3 Redundancy and Physical SecurityFigure 4 - 10/100BASE-TX LAN LEDs FIPS 140-1 Logical Interface5. Apply one 1 label over the keyboard button cover as shown in Figure Contivity Extranet Switch Figure 7 - Tamper Evident Labels Applied to Rear PanelFigure 8 - Tamper-Evident Label Extranet Switch 2.4 Roles and Services∙ IPSec Protocol Tunnels ∙ PPTP Protocol Tunnels Contivity Extranet Switch, and in the online help for the switch 3 Secure Operation of the Contivity Switch 2.5 Key Management2.6 Self Tests Required Recommended