38IP Phone 1535 System Software Updates
•the required provisioning of the directory structure on your FTP update server,
•the files involved in the IP Phone 1535 software update process, and
•the special handling requirements for the FirmwareUpdateRequest.acfg file.
Configuring the FTP server login account
For the IP Phone 1535 to successfully obtain software updates, you must configure a login account on your FTP server, which the IP Phone 1535 will use in making its connection during the software update process.
You must provision an FTP user account with a username and password as follows:
•Username: ipphone
•Password: 15354all
When the IP Phone 1535 attempts to make a connection to your FTP server, it will automatically do so using this username and password. These required username and password values are coded into the firmware of the IP Phone 1535, and so your FTP account information must be configured to match.
Provisioning the FTP server directory structure
In order for the IP Phone 1535 to successfully find the software update files available on your FTP update server, the directory structure on the FTP server must be provisioned as follows:
/ [hardware version] / [software version]
For more information, see Figure 3 "Sample FTP server directory structure" (page 42).
•The ROOT (/) Directory: The ROOT Folder of your FTP server is the folder to which the IP Phone 1535 will connect and authenticate itself (using the username ipphone and the password 15354all, as provisioned in your FTP account setup).
•The [hardware version] Folder: This folder sits inside the Root folder - the name of the [hardware version] folder corresponds to the hardware version of your IP Phone 1535. You will need a corresponding [hardware version] folder inside the Root folder for every different hardware version for every IP Phone 1535 device installed on your network. That is, if you have an IP Phone 1535 with hardware version 1.0, you will need to have a corresponding [hardware version] folder named ’1.0’ within your Root folder. If you then also have an IP Phone 1535 installed on your network with hardware version 1.1, you will need to add a second [hardware
Nortel Multimedia Communications Server 5100
Nortel IP Phone 1535 Installation and Commissioning
Release 4.0 22 August 2007
