Nortel Networks 555-7101-215 manual Switch connectivity, LAN connectivity

702t server description Standard 1.0

In this illustration, the telephony LAN (TLAN) provides IP connectivity between the Succession CSE 1000 system and the i2004 Internet phonesets. The connection between the Call Server and Media Gateway can be point- to-point, or it can be through the LAN, if the system is installed in a distributed data network.

For information about the Succession CSE 1000 system and i2004 Internet phoneset bandwidth and network requirements, refer to the Succession Communication Server for Enterprise 1000 Planning and Installation Guide (NTP 553-3023-210).

Switch connectivity

For more details about how the 702t server and switch connection is established, refer to Part 3 in the CallPilot Installation and Configuration binder.

LAN connectivity

The 702t server provides 10/100Base-T Ethernet network connectivity. See “Rear panel diagram” on page 13 and “Slot assignments” on page 14 for details on the location of network interface cards. The function of each Ñnetwork interface card is described below:

An Ethernet controller on the server’s motherboard provides connectivity to the ELAN.

For information about the ELAN’s purpose and requirements, see “About the ELAN” in Part 1 of the CallPilot Installation and Configuration

Ñbinder.

An optional network interface card (NIC) is installed in the server.

This optional NIC is required only for Meridian 1 or Succession

CSE 1000 systems that require a CLAN connection (in addition to the ELAN connection). The CLAN provides data connectivity between desktop and web messaging clients and the CallPilot server.

22 CallPilot