Using the telset configuration interface 21
Programming telephones
To access and use the telset configuration menus, you require a digital or IP telephone with a
Both the 7316E digital phone and the 2004 IP phone, shown in Figure 7, can be used for this purpose.
Figure 7 Digital phone and IP phone
7316E digital | 2004 |
phone | IP phone |
Navigating the telset menus
Digital and IP phones use slightly different methods of navigating through the telset menus. This section contains the following information:
•“Using a digital phone to navigate” on page 21
•“Using an IP phone to navigate the menus” on page 22
•“What the navigation headings and directions mean” on page 23
•“Activating menu prompts” on page 23
Using a digital phone to navigate
When you use a 7316 or 7316E digital phone for telset programming, a group of buttons on the telephone are used to move through programming headings and settings. The programming overlay is used to relabel the four buttons used during programming. The overlay is supplied with each telephone.
BCM50 Telset Administration Guide
