Remote Notification (continued)

8 5 2

To change your notification days (continued)

1In Remote Notification setup change, press 5 when prompted for notification days. You can press # to leave this setting without changing it, or continue.

2Select each notification day by pressing the number corresponding to that day of the week. For example, to select Monday, press 1, to select Sunday, press 7. Each day is assumed to be off until you select it, regardless of any previous settings.

￿To deselect a day, press its number again.

3When you have finished selecting days, press #.

￿To change your selections, press 5.

4Press 3 to go to the next setting, or press 1 to go to the previous setting.

To change your notification times

You can set the times of the day at which you want to receive remote notification of messages. The standard time is all day. You can set two non-overlapping time periods within a 24-hour day; both periods apply to the one sequence of notification days that you selected above. Here are some tips for setting times:

￿Time settings include minutes, and each setting must end with #.

For a time setting of 9:00, press 9 0 0 #. For a.m., press 1; for p.m., press 2. Time setting is for the time zone at your mailbox location.

￿Ask your administrator if your mailbox can be set up so that you receive notification when new messages are waiting at the start of your notification time period.

￿You can enter times that span midnight by entering an end time that is earlier than the start time; the end time is assumed to be on the next day. Select only the first day as a notification day.

For example, if you select Monday as your only notification day, and you set up the time period for 11 p.m. to 7 a.m., you will receive notification from 11 p.m. Monday to 7 a.m. Tuesday.

1In Remote Notification setup change, press 5 when prompted for notification times.

2At the prompt for start time, enter a new time, or press # to keep the current time.

3At the prompt for end time, enter a new time, or press # to keep the current time.

￿If a second time period already exists, you hear the times currently set. To delete the second time period, press 7 6. To change the times, press 5.

￿If a second time period does not exist and you want to add one, press 5.

4At the prompt for start time, enter a new time, or press # to keep the current time.

5At the prompt for end time, enter a new time, or press # to keep the current time.

6Press 6 to exit Remote Notification setup change.

25

Page 25
Image 25
Nortel Networks X-6000 manual To change your notification times