Cleaning The Inlet Filter | Checking the Hoses |
WARNING: Check whether dangerous chemicals have been used, and take precautions when handling filters.
WARNING: Do not use a finger or skin to check for leaks. Escaping fluid under pressure has sufficient force to penetrate the skin, causing serious injury. Do not operate the pressure washer if the hose is cracked, worn, or leaking.
A.) Check all hoses for leaks
B.) Check all hoses of worn areas
Good
| Bad |
|
00531 | Water |
|
Inlet Filter |
| |
fig00531 |
| |
|
| |
Clear Tube |
|
|
A.) Unscrew clear tube by hand. | Bad | 00426 |
| ||
|
| |
B.) Remove Inlet filter | Wire Mesh |
|
C.) Run water though to clean filter | Changing The Pump Oil |
|
|
|
Checking the Tire Air Pressure
A.) | Remove air fill cap |
B.) | Fill tire to 20psi (1.4bar) |
C.) | Replace air fill cap |
*Change oil after first 50 hours, then every 3 months or 500 hours
1.) Remove oil drain plug
2.) Drain pump oil
3.) Replace oil drain plug
4.) Fill pump with SAE 30
5.) Use dip stick to fill to proper level or sight glass on Cat pumps.
Air Fill Stem 
Air Fill Cap | 00425 |
Burner Fuel Filter
Drain water which has accumulated in the fuel filter bowl and replace the filter as needed.
Quantities Of Fluid
Pump | Type of Fluid | QTY |
AR | SAE 30* | 11.0oz (0.33L) |
CAT | SAE 30** | 14.0oz (0.41L) |
AR PUMPS | CAT |
| PUMPS |
Oil Fill | Oil Fill | Oil Drain Plug | |
Oil Drain Plug | |||
| (Underneath) | ||
Filter | (Underneath) |
| |
|
| ||
Water Drain |
|
|
14
