North Star MHOTPWR II. Assembly Instructions, Description, Axle, Wheel Retainer Wheel

II.) Assembly Instructions

A. 1. Carefully raise the pressure washer off the floor by	Axle
using blocks or ramps. Make sure the pressure
washer is secure before proceeding.

2.Install the two wheels as shown with grease zerk away from frame.

3.Slide the two wheel retainers onto the end of the axle. Tighten the set screw with the hex wrench provided in the parts bag .

Description	Qty.
Wheel	2
Wheel Retainer	2

Wheel Retainer

Wheel

B.1. Install the pressure hose onto the pressure washer as shown.

2.Connect the other end of the pressure hose to the spray gun as shown.

3.Make sure all plumbing connections are tight.

Description	Qty.
Spray Gun/ Lance	1
Spray Hose	1

00787

7