21
Reference Manual
4 The displays
Press to show the Display menu, select a display op tion using the Control Dial and press .
Displays a standard autopilot display with j ust the essential autopilot data.
Display area Function
Drive
indicators
Left and right boxes light up to indic ate when the autopilot is
driving the rudder
Heading Large digits show the heading of the ve ssel
Info panel This panel can be configured to di splay different data items.
Default: Automatically sw itches between Rudder angle, Course
error and Cross track error.
Set course STBY mode: shows ‘---’ since the set course is no t valid in
standby mode
AUTO mode: digits show the current c ourse to steer (CTS ), except
for WIND mode: digits show the current se t wind angle (SWA)
The colored ring is yellow in STBY mode, gr een in AUTO mode,
magenta in H-STEER mode and red when there is a cr itical alarm
Steering
mode
panel
Shows the steering mode (COMPAS S, GPS, WIND)
Operating
mode
panel
Shows the operating mode (Standby, Auto, H-S teer). Panel
changes to blue when in AUTO mode.
Options menu:
Data setup - Selects what data is di splayed in the info panel.
Auto Rd/CE/XTE – Automatically switches the dis played data between rudder, course e rror and cross track
error depending on the operating mo de.
Course error – Shows a course error bar in the info panel.
Rudder angle – Shows a rudder angle gauge in the info panel .
XTE – Shows a cross track error bar in the info pa nel.
Tip: Repeated pressing
will cycle the
menu selection and will
automatically select after
1 second.

4-1 Display > Basic

Basic displays