4-3 Display > Compass
Displays a standard autopilot display with just the essential autopilot data.
Display area | Function | |
|
|
|
| Data | Customizable data cells. Each display page has a separate |
| Header | header configuration. Default: Course to steer, Heading, Alarm |
|
| Status (see section 5). |
|
|
|
| Drive | Left and right boxes ‘fill up’ to indicate when the autopilot is |
| indicators | driving the rudder and how much power is being used by the |
|
| drive system |
|
|
|
| Compass | Compass card rotates to show the heading of the vessel under |
| card | the lubber mark. |
|
|
|
| Course | STBY mode: points to the current heading |
| arrow | AUTO mode: points to the set course, except for: |
|
| GPS mode: points to the bearing to waypoint |
|
|
|
| Deviation | Moves laterally to show course information. |
| bar | Note: This bar can be configured to display different items. |
|
| Default: Automatically switches between Rudder angle, Course |
|
| error and Cross track error. |
|
|
|
| Deviation | Indicates what data the deviation bar is currently showing and |
| scale | the magnitude |
|
|
|
| Mode | Left hand side: shows the steering mode (COMPASS, GPS, WIND) |
| panel | Right hand side: shows the operating mode (Standby, Auto, |
|
| |
|
| Panel changes to blue when in AUTO mode. The colored tab |
|
| is yellow in STBY mode, green in AUTO mode, magenta in |
|
| |
Compass displays
Options menu:
Deviation bar Selects what data is displayed by the deviation bar.
Auto Rd/CE/XTE – Automatically switches the deviation bar between rudder, course error and cross track error depending on the operating mode.
Course error – Shows course error using the deviation bar.
Rudder angle – Shows a rudder angle gauge using the deviation bar.
XTE – Shows a cross track error bar using the deviation bar.
Header — Menu for configuring the data header in this display (see section 5).
Reference Manual | 23 |
|
