The Solution Status is also indicated as computed in the Position window.

Entering Commands

Commands can be sent to the receiver with the Console window under View in the menu bar. Enter commands in the text box at the bottom of the Console window.

Note the following when entering commands:

Logs can be requested in three formats: ASCII (e.g., log bestposa), Abbreviated ASCII (e.g., log bestpos) and Binary (e.g., log bestposb). Abbreviated ASCII is the best format to use when you want to work with the receiver directly. For data collection, use ASCII or Binary.

Press ENTER to send the command string to the receiver. Commands are not case sensitive.

Refer to the OEM6 Family Firmware Reference Manual(OM-20000129) for the list of available commands and logs and the parameters used.

ENABLING SBAS

All GPS capable models of OEM6 family cards are capable of SBAS positioning. This positioning mode is enabled using the SBASCONTROL command, as follows:

sbascontrol enable auto

Once enabled, the Solution type field shown in Connect’s Position window should change from Single to SBAS. SBAS satellites display in the Constellation window. OEM6 family cards track available SBAS satellites, including WAAS, EGNOS and other SBAS systems.

7

Page 7
Image 7
Novatel GM-14915095 quick start Entering Commands, Enabling Sbas