CONNECTIONS
Typical connection with a mixer is illustrated right.
a). Connect the output connection cords from the CD Player to the line inputs of your mixer.
b)Connect the remote control connection cable from the Unit 1 connector on the main unit to the Unit 1 connector on the remote control unit. Repeat for Unit 2.
c)The output connection cords and the remote control connection cables are supplied with the main unit. Be sure to use the remote control connection cables which have been supplied. Use of another cable type might cause damage.
d)Connect Relay or Fader start cables 
For fader start attach both side of your CD play to a similarly equipped DJ mixer, as in the top drawing.
For relay capability take the auto start cable and connect the two jacks in the rear of your CD player.
MOUNTING YOUR CD PLAYER
e)Mount the units in your console or rack with 19” EIA rails.
f)The transport should be mounted not to exceed an angle of 15 degrees.
g)Your CD player can be affected by excess vibration so mount the units in a secure environment if possible.
| - The Leader in DJ Technology |
|
©2002 Numark Industries | - 7 - | http://www.numark.com |
