Planning, Wiring | NuTone 515T, 101T instruction

INSTALLATION INSTRUCTIONS READ & SAVE THESE INSTRUCTIONS!

Two-Note

Surface-Mounted

Door Chimes

PLANNING

•Your NuTone Door Chime is designed for two-door operation.

•If the home is multiple-level or large ranch style, two or more chimes should be used to provide adequate coverage.

•Handle the door chime carefully, as you would any precision instrument.

WIRING

BE SURE HOUSE POWER IS TURNED OFF WHEN WIRING THE TRANSFORMER. WIRING CONNECTIONS MUST COMPLY WITH LOCAL OR NATIONAL WIRING CODES.

•For a single installation, use NuTone Model 515T or 101T Transformer.

•For two or more chimes, use NuTone Model 105T or 301T Transformer.

NOTE: When fastening chime wiring to wall studs and ceiling joists, care must be taken to avoid possible “shorts” that might be created by allowing staples or clips to cut through the protective wiring insulation.

Refer to Figure 1. Mount the transformer to a convenient junction box (attic location is not recommended) or circuit breaker box. Connect house power leads to transformer leads – black to black and white to white.

Refer to Figure 2 for single chime installation or to Figure 3 for multiple chime installation. Run 2 conductor 18-22 gauge wire from transformer and the pushbutton(s) to chime location(s). Bring the wires through the wiring hole in the chime baseplate(s) and fasten the baseplate(s) to the wall though the mounting holes with the screws provided. Connect the transformer and the pushbutton wires to the chime terminal board(s).

NOTE: Upon completion of installation, if the chime does not operate properly, check the pushbutton(s) for poor contact or loose connections. Be certain wires are not touching the tone bars.

TUBE INSTALLATION (When applicable)

Refer to Figure 4. Hang tubes onto hanger bracket hooks so that the longest tube is at the left and the shortest at the right.

MOUNTING COVER

Install the chime cover over the baseplate.

MAINTENANCE INSTRUCTIONS

If chime plungers should ever become “sluggish” in their movement, clean plungers with a nonflammable cleaning fluid and wipe dry.

CAUTION: NEVER OIL CHIME PLUNGERS.

REPLACEMENT PARTS OR SERVICE

Contact your local Authorized NuTone Parts Outlet or Service Center. If you are unable to locate the facility, write NuTone Inc., 4820 Red Bank Road, Cincinnati, Ohio 45227-1599.

Attention: Department of National Field Service.

		FIGURE 1
SINGLE
2-NOTE CHIME		120vAC WIRING
FRONT	FRONT DOOR
	FRONT DOOR
TRANS	PUSHBUTTON	NUTONE 101T
		NUTONE 101T
		OR 515T
		OR 515T
REAR	REAR DOOR	TRANSFORMER
REAR	REAR DOOR
18-22 GA. INSULATED	PUSHBUTTON
18-22 GA. INSULATED
TERMINAL 2-CONDUCTOR WIRE
BOARD

FIGURE 2

MULTIPLE
2-NOTE CHIMES		FRONT DOOR	120vAC WIRING
		PUSHBUTTON
FRONT	FRONT	18-22 GA. INSULATED
		18-22 GA. INSULATED
TRANS	TRANS	2-CONDUCTOR WIRE
TRANS	TRANS
REAR	REAR		NUTONE 105T
		COMMON WIRES	NUTONE 105T
		COMMON WIRES	OR 301
TERMINAL	TERMINAL		TRANSFORMER
TERMINAL	TERMINAL
BOARD	BOARD
CHIME NO. 1	CHIME NO. 2	REAR DOOR
		PUSHBUTTON
			FIGURE 3

SHORT

LONG

FIGURE 4

515T, 101T specifications

The NuTone 101T and 515T models are two standout offerings from NuTone, a brand known for its innovation in home ventilation and air quality solutions. Both of these models cater to distinct needs, combining functionality with advanced technology to enhance living environments.

The NuTone 101T is particularly designed for those who desire a more compact and efficient solution. This model is equipped with a powerful motor that ensures effective air movement, making it ideal for smaller spaces. A key feature of the 101T is its easy installation process, allowing homeowners to set it up quickly without the need for professional assistance. Additionally, the 101T incorporates a modern design that can seamlessly blend with various home aesthetics. Its quiet operation is another highlight, ensuring that users can enjoy clean air without the disruptive noise that often comes with traditional fans.

On the other hand, the NuTone 515T is built to handle larger areas, making it suitable for more expansive settings. This model boasts enhanced air circulation capabilities, thanks to its powerful airflow settings. The 515T is designed with energy efficiency in mind, helping users save on energy costs while maintaining excellent ventilation. One of its standout technologies is the built-in humidity sensor, which automatically adjusts the fan's operation based on moisture levels in the air. This not only helps in managing humidity but also improves the overall comfort of indoor spaces.

Both models come with user-friendly controls, enabling homeowners to easily adjust settings according to their preferences. The durable construction of the 101T and 515T ensures longevity, making them worthwhile investments for any household. Furthermore, NuTone has prioritized safety and compliance in both models, ensuring they meet industry standards.

In conclusion, the NuTone 101T and 515T offer distinct features and technologies suited for different needs. While the 101T excels in compact efficiency and quiet operation, the 515T provides enhanced airflow and energy-saving benefits for larger areas. Together, they represent NuTone's commitment to delivering quality air solutions that enhance home comfort and well-being.

NuTone 515T installation instructions Planning, Wiring, Mounting Cover, Maintenance Instructions

Models: 515T 101T