1. HOW TO ASSEMBLE POWER BRUSH/WAND/HANDLE
1.Read important safety instructions before installing power brush.
2.Ensure hose is disconnected from power supply before installing power brush.
3.Push wand into power brush neck so that the lock button snaps in place.
4.Connect hose handle into wand quick connector and ensure that the prongs are aligned with the receptacle holes. Push until lock button snaps in place.
WAND TO POWER BRUSH CONNECTION
LOCK BUTTON |
|
| WAND |
POWER BRUSH | RELEASE |
NECK | PEDAL |
HEIGHT |
|
ADJUSTMENT |
|
PEDAL |
|
| POWER BRUSH |
| NECK RELEASE |
| PEDAL |
HOSE HANDLE TO WAND CONNECTION
HOSE
HANDLE
RECEPTACLE
LOCK
BUTTON
PRONGS
HOSE HANDLE
RELEASE BUTTON
WAND
| HOSE |
LOCK | HANDLE |
| |
BUTTON | RECEPTACLE |
| |
PRONGS |
|
| QUICK |
| CONNECTOR |
WAND |
|
WAND |
|
GRIP |
|
LOCK |
|
BUTTON |
|
POWER |
|
BRUSH |
|
WAND & HOSE COMPATIBILITY
See section 5 on page 7
for wand and hose compatibility table.
? 
- 3 -
