2. HOW TO USE POWER BRUSH/WAND
CAUTION
Always pick up hard or sharp objects by hand before using your power brush. Items such as pins, hairpins, tacks, crayons, etc., may damage the brush roll or may break the belt.
2.1 WAND RELEASE
The power brush is not recommended for use on bare floors. Wand release pedal (A) on power brush allows you to quickly disconnect wand and switch to combination floor/rug tool for use on bare floors.
2.2 POWER BRUSH NECK RELEASE
CAUTION
Always unlock brush neck before use.
Push down power brush neck release pedal (B) to unlock brush neck. Return the neck to the upright position for storage.
C |
A |
B |
2.3 POWER BRUSH HEIGHT ADJUSTMENT |
|
| |||
The icons (D) refer to the carpet pile height. Select height | FLOOR HEIGHT | ||||
by depressing height adjustment pedal (C) to desired position: |
| ||||
(Low), | (Medium) or | (High). |
| ||
HEIGHT ADJUSTMENT LED INDICATORS |
|
| D | ||
The LEDs show the carpet pile covered by the selected |
| ||||
height, e.g.: when | (High) is selected, all LEDs will be |
| |||
lit, since this height covers all pile heights. So | if |
| |||
| |||||
|
|
| E |
|
|
2.4 WAND LENGTH ADJUSTMENT |
|
|
| ||
Extend (E) or shorten (F) the wand to comfortable |
|
|
| ||
work position by holding the wand grip (G) in |
| F |
| ||
one hand and sliding the upper section (the one |
|
| G | ||
with the prongs) with the other hand. |
|
| |||
2.5 EDGE CLEANER
Brush extends full width for effective edge cleaning along both sides of nozzle. To operate, simply run cleaner along edge board. Rubber bumper protects furniture and baseboards.
- 4 -
