INSTALL THE DUCTWORK

(DUCTEDHOODSONLY)

NOTE: To reduce the risk of fire, use only metal ductwork.

1.Decide where the ductwork will run between the hood and the outside.

2.A straight, short duct run will allow the hood to perform most efficiently.

3.Long duct runs, elbows, and transitions will reduce the performance of the hood. Use as few of them as possible. Larger ducting may be required for best performance with longer duct runs.

4.Install a roof or wall cap. Connect round metal ductwork to cap and work back to- wards hood location. Use duct tape to seal the joints between ductwork sections.

ROOF CAP

 

ROUND

 

DUCT

DECORATIVE

WALL

CAP

FLUE

 

HOOD

ROUND

 

 

ELBOW

24” TO 30” ABOVE

 

COOKING SURFACE

 

 

6 ”

 

A D A P T E R

WIRING

Note: This range hood must be properly grounded. The unit should be installed by a qualified electrician in accordance with all applicable national and local electrical codes.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

WARNING - Improper grounding can result in a risk of electric shock.

Consult a qualified electrician if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded. Do not use an extension cord. If the power supply cord is too short, have a qualified electrician install an outlet near the appliance.

Set the electrical power supply within the space covered by the decorative flues.

Position the power socket at a maximum distance of 33-7/16” (85 cm) from where the lead exits from the hood (see illustration alongside). Make sure this does not interfere with the bracket fastening area or with the decorative flue (where the flue touches the wall).

Fit the plug into the power socket.

- 5 -

Page 4 Page 6
Page 5
Image 5
NuTone NP52000, NP51000 manual Install the Ductwork, Wiring
Page 4 Page 6

NP52000, NP51000 specifications

NuTone, a renowned name in home ventilation and air quality products, offers a range of innovative solutions, including the NP51000 and NP52000 models. Both units are designed to enhance indoor air quality while ensuring comfort and convenience in any living space.

The NuTone NP51000 is engineered with a powerful motor that delivers exceptional airflow while operating quietly, making it a perfect choice for residential settings where peace and tranquility are a priority. This model features a sleek design that complements modern decor, ensuring it integrates seamlessly into any bathroom or kitchen environment.

In terms of functionality, the NP51000 includes an adjustable humidity sensor that automatically activates the fan when moisture levels rise. This technology helps prevent mold and mildew growth, providing a healthier living environment. Additionally, the model is equipped with a built-in light fixture, offering dual functionality as both a ventilation fan and a light source. The energy-efficient LED lighting not only reduces electricity consumption but also enhances visibility in spaces that require illumination.

On the other hand, the NuTone NP52000 takes ventilation a step further with enhanced features. This model boasts a higher CFM (Cubic Feet per Minute) rating, offering optimal airflow for larger spaces or more intensive ventilation needs. Like the NP51000, the NP52000 also comes with an integrated humidity sensor and LED lighting, but it includes advanced sound-dampening technology to further minimize noise during operation.

Both models are designed with ease of installation in mind, featuring a straightforward mounting system that allows homeowners to set up the units with minimal effort. The durable construction ensures a longer lifespan, while the easy-to-clean surfaces promote maintenance without hassle.

Another key aspect of both the NP51000 and NP52000 is their energy efficiency, which meets or exceeds ENERGY STAR guidelines. This not only reduces utility costs but also supports environmentally conscious living.

In conclusion, the NuTone NP51000 and NP52000 models represent the fusion of style, functionality, and advanced technology in home ventilation. Whether one prefers the NP51000 for its quieter operation or the NP52000 for its enhanced power, both options provide effective solutions for improving indoor air quality and overall home comfort.
Top Page Image Contents