HALOGEN BULBS
This range hood requires two halogen bulbs (Type MR16, 12V, 20W). To change bulbs:
1.Remove the grease filter.
2.Remove bulbs by pulling them straight downward. Do not rotate bulbs.
3.Remount the grease filter.
4.Replace bulbs by aligning the bulb’s pins with the receptacle holes and pushing bulb upward.
FUSE REPLACEMENT
SWITCHOFFTHEELECTRICITYSUPPLY.
Push the lower flue upwards. Open the electrical box.
Replace with the same type of fuse (5x20mm, 4A, 125V).
FUSE
WARRANTY
RANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OR MERCHANT ABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
During this
THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS, TUBES, HALOGEN AND INCANDESCENDT BULBS. This warranty does not cover (a) normal maintenance and service or (b) any products or parts which have been subject to misuse, negligence, accident, improper maintenance or repair (other than by
The duration of any implied warranty is limited to the
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. This warranty supersedes all prior warranties.
To qualify for warranty service, you must (a) notify
Broan-NuTone LLC. 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
NuTone, Inc.,4820 Red Bank Road, Cincinnati, OH 45227
- 10 -