16 MediaShield User’s Guide – Version 4.0
CHAPTER 2
Setting Up Your RAID Configuration
Installing the NVIDIA MediaShield Software Under Windows
This section describes how to run the setup application and install the RAID software1.
1 Start the nForce Setup program to open the NVIDIA Windows nForce Drivers page.
Figure 2.4
nForce Driver Installation Window
2Select the modules that you want to install.
Make sure that the “NVIDIA IDE Driver” is selected.
You must install the NVIDIA IDE driver in order to enable NVIDIA MediaShield. If
you do not install the NVIDIA IDE driver, NVIDIA MediaShield will not be enabled.
3Click Next and then follow the instructions.
4After the installation is completed, be sure to reboot the PC.
5After the reboot, initialize the newly created array as described in the next section.
1. See the application note “Installing the NVIDIA IDE Driver in Windows 2000” on page 150 for infor-
mation on how to install the NVIDIA IDE Driver under Windows 2000.