NVIDIA Corporation 43
CHAPTER 3
Using the NVIDIA MediaShield RAID Management Utility
Creating RAID Arrays
This section covers use of the MediaShield Creation Wizard. This wizard will step
through configuration of your available storage.
There are three ways in which the MediaShield Create Wizard can be launched:
• Using the balloon popup that appears when the system boots:
This balloon indicates that MediaShield has discovered free disks in your system
available for configuration. If you click on the bubble, the MediaShield Create Wizard
will be launched.
Note: This balloon will only pop up if you have up to three available disks. If you have
four or more disks available, you must use one of the remaining two methods to
start the MediaShield Create Wizard.
• Using the following dialog that appears when launching MediaShield:
If you select Yes, the MediaShield Create Wizard will be launched, and will step you
through configuration of your storage.
• You can also select the Create option under System Tasks to launch the MediaShield
Create Wizard.